Contact Us

Tel: +86-757-86685210

Fax: +86-757-86685210

Mob: +86-18802068132

E-mail: info@jensysenergy.com

Add: Floor 2, Bldg. A, Tangtou Tech Ind. Zone, Shishan Town, Nanhai Dist., Foshan, Guangdong,China

Home > Knowledge > Content
Three-phase sine wave inverter characteristics Sep 07, 2018

Function and characteristics:

(1) The inverter uses CPU control, high quality, intelligent sine wave output, which is unique to this product.

(2) The inverter output of this product can load various types of equipment, such as fans, refrigerators, air conditioners, electric drills, motors, fluorescent lamps, gas lamps and other household appliances, communication equipment, industrial equipment. It compensates for the disadvantage that the square wave inverter inverter output is harmful to the load.

Note: Before using the equipment, you must confirm that the equipment is three-phase four-wire (one of which is ground) or three-phase five-wire (one of which is ground)

(3) The intelligent switch machine is designed for easy operation.

(4) Excellent output short circuit protection design. When the inverter is in battery operation mode, if the short circuit is encountered, the inverter will automatically turn off the machine. Can resist large currents to initiate load shocks.

(5) The perfect overload protection design can effectively protect the safe operation of the inverter. When the load is in the range of 100%-120%, the inverter will automatically shut down in about 30 seconds. When the load is greater than 120%, the inverter will Automatically shut down immediately.

(6) Battery protection: The voltage of a single battery is 10 volts (maintenance-free battery only)

(7) Anti-interference protection: surge protection

(8) The maximum protection voltage of the mains is 260VAC-270VAC, and the minimum is 170VAC.

(9) When the mains R phase is normal, the battery will be able to charge automatically.

(10) When there is less phase or multiphase in the mains and there is a problem with the three-phase socket, the inverter will work in battery mode.

(11) When the inverter is operating in battery mode, if one or more phases are not available, the inverter will have no output and cannot be loaded.